| Architectural
- Built Into |
| |
|
 U1
The U1 Subwoofer system is a freestanding design for use with Evolution
monitors when tower systems are not an option. The U1 system consists
of an enclosure containing two, side-loaded 12" aluminum woofers
and the A1 amplifier and X1 active crossover. Finish options: non-reflective
anthracite. |
 U2
The U2 Subwoofer
system is designed for use in cabinets or rooms with significant bass
response anomalies. The system consists of two small enclosures each
containing a single 12" aluminum woofer, the A1 amplifier and
X1 active crossover. Finish options: non-reflective anthracite. |
|
|
| |
|
 M5
The M5 monitor is designed for small to medium size rooms. The M5
can be oriented vertically or horizontally and placed on stands or
in cabinets with no sonic compromise due to its 3-way design. Mid-bass
response can be adjusted with a switch on the crossover depending
on placement location. Finish options: non-reflective anthracite. |
 M6
The M6 monitor
is identical in design to the M5 but uses larger woofers and mid-range
drivers in a system delivering higher output required for medium to
large rooms. The same features as found on the M5 are available on
the M6. Finish options: non-reflective anthracite. |
|
|
| |
|
 A1
The A1 is a full-frequency (20Hz - 20kHz), 250 watt, monaural amplifier
built into a slender 1.75" high chassis. The low distortion amplifier
design is class G, which is more efficient and runs cooler that other
designs yet provides plenty of headroom for high dynamic range. |
L5
The L5 monitor incorporates the M5 driver set in a compact, wall mounting
aluminum enclosure. The L5 is ideal for surround channels for any
Evolution system and can be mounted on walls or ceilings and rotatable
up to 180 degrees. The hidden mounting system is easy to install and
keeps the L5 close to the wall. The L5 can be used as main speakers
for a flat television display if desired. Finish options: white, silver
and anthracite. |
|
|
| |
|
 X1
The X1 provides the bass equalization and is the control center for
Evolution subwoofer systems. The X1 is a fully featured active crossover
network which allows complete control over integration of the subwoofer
and satellites. Switchable from mono to stereo operation, the X1 can
control multiple subwoofers or provide stereo bass where required. |
|
|
|
