|
If
there were a word in the new millennium that has become ubiquitous
and all but neutered of its former meaning, it would be the word,
“power.” But you know, we’re going to spit in
the face of that
fact,
slam our stake in the ground and hang with it. Why? Because our
Power2 is true. It’s clean. And it’s a friggen’
load of 2-channel manhood. What else you gonna call it? Used with
The Controller for our “stereo systems,” the Power2
is also a perfect choice to push back channels in 6.1 and 7.1 channel
rigs too.
| Specifications |
|
|
| Power
Output: |
2 x 200W RMS @ 8ohms THD+N <0.05% - all channels driven simultaneously |
| Frequency
Response: |
+/-0.5dB
20-20kHz |
|
Dynamic Range: |
112dB A-weighted @ full power |
| Damping
Factor: |
2000 @ 8ohms 100Hz |
| Peak
Current: |
35A |
| IM
Distortion: |
(CCIF)
0.0005% |
| TM
Distortion: |
0.003% |
| |
|
| Soft
Clipping |
|
| NHTBus
Features |
Intelligent operation with NHT Controller.
Monitoring of amplifier status |
| Amplifier
Control: |
On/Standby/Mute.
Control of individual channel
operation - On/Off. Utilizes Ethernet infrastructure |
| Protection
Features: |
Phase-to-phase
short. Phase-to-ground short.
Under voltage. Thermal protection |
| Rear
Panel Connectors & Components: |
2
single-ended RCA input connectors, 2 pair
of binding posts for speaker output - banana spacing
12V trigger input/output on 1/8" sub mini jacks
NHTBus connector on RJ45, IEC mains voltage socket |
| Front
Panel Features: |
2
dual-color LED’s for each channel indicating OK/Fault
Standby, Touch sensor, Standby indicator |
| Weight:
|
22.2
lbs. |
| Power2
Dimensions: |
3.875"
H x 17.25" W x 17" D |
|
|
